[customer consultation]

  Our company wants to buy several induction heaters for the heating assembly of the roller bevel gear of the grader. The inner diameter of the roller bevel gear is 210mm, and the outer diameter is about 380mm. Two of them are heated at a time.

 Requirements: 1, induction heating equipment with temperature display and control
    2. Temperature difference in ± Within 5 degrees
    3. Heat the part to 180 degrees in 90 seconds.

  Can the above conditions be met? Is it enough?

[customer service online]

  Dear customers, our company has been specializing in the production of induction heater for nearly 20 years, with rich experience and advanced design and manufacturing strength.

  We can fully satisfy the question you asked. The roller bevel gear of locomotive is a common part, and its heating temperature and time can be reached, so there are a lot of application cases. The temperature difference of 5 degrees is a reasonable range, and the above problems can be met without any problems.

  We look forward to the success of our cooperation.

   Email contact ：czzydq@163.com