Abstract: Large shafting wind power bearing seat induction heating equipment, can use a heating host, control the way of multiple heating ring body, convenient to complete the heating of large bearing seat, this paper introduces the heating method by combining pictures and texts.

Wind power bearing seat diameter is large, the conventional heating method is to put the bearing seat on the induction heater heating, that is, the heater does not move, the bearing seat transfer heating, and then install.

 If the bearing seat does not move, is there a good way to heat its inner hole? The answer is yes. The matching heating ring is heated in the inner hole of the bearing seat. The heating ring is light in weight and the high temperature line is fixed and wound in the ring body. When heating is needed, the heating ring is put into the inner hole of the bearing seat.

 Bearing seat heater can be made into a heating host configured with several induction heating rings, such as three to five types of bearing seat or bearing size, it will match the corresponding number of heating rings, electromagnetic heating wire is fixed inside the ring body, the whole heating ring can be lifted, set 3 hooks.

The power of heating equipment is usually 40-60KW. The bearing seat with a diameter of 2.2 meters, for example, weighs more than 3 tons. The heating time is generally completed within 15 minutes. The heater host is available in standard models, but the ring body needs to be customized.

Each heater is connected with the host power supply with a quick plug, this high-power fast plug is convenient to replace the ring body, which plug is used to connect which one, the control of the same bearing induction heater, the control method is the same, digital display LCD screen operation.

We are a heater manufacturer from China, if you need, please contact us，Different sizes of heaters can be customized according to the parts

email：czzydq@163.com