Zhuangyuan flywheel ring gear heater (commonly known as ring gear hot sleeve machine) uses the principle of power frequency induction eddy current to heat the ring gear and assemble it with flywheel interference hot sleeve. The heating speed of the equipment is fast, clean and pollution-free.

When the ring gear is heated to 180 ~ 200 degrees, it can basically meet the assembly requirements. The interference between ordinary ring gear and flywheel is generally 40 ~ 50 Silk meters. Generally, the ring gear diameter of diesel engine is larger, that of gasoline engine is smaller, and that of multi cylinder diesel engine is in the middle. When the diameter of gear ring is large and the weight is heavy, the heater with high power should be selected.

Zhuangyuan brand ring gear heater has high thermal efficiency and fast heating speed. It adopts the time control method of digital display. The time can be set according to the needs. When the heating reaches the set event, the equipment automatically cuts off the power supply and stops heating. The machine body, bridge cover and operating platform are made of 304 stainless steel. The operating platform is paved with white heat-resistant plate, which can withstand 500 degrees, and can prevent the heat loss of the ring gear after heating.

The heater can be used immediately without preheating, the gear ring is heated evenly, the temperature difference of each point of the whole body is not more than 1 degree, and the same amount of expansion from the inside to the outside can easily realize the assembly with the flywheel heat sleeve.