Welcome to the official website of Changzhou Zhuangyuan Electrical Manufacturing Co., Ltd!

Gear ring heater

1、 How it works

The ring gear heater is used in the assembly of ring gear and flywheel of diesel engine, gasoline engine and other power machinery. After the ring gear is heated rapidly by the eddy current principle of power frequency induction, the ring gear is evenly heated, and the diameter of the ring gear is expanded by the same amount. The ring gear is assembled with the flywheel interference heat sleeve.

齿圈加热器1.jpg

2、 Equipment features

1. The frequency of the machine is 50 Hz, the material of the gear ring is not changed, and the induced current has no effect on the human body.

2. High thermal efficiency, fast heating speed, truly energy saving and high efficiency.

3. Digital time control, heating time can be adjusted according to the needs of assembly.

4. Lever type upper yoke, easy to take and place the gear ring.

5. Special heat-resistant plate is pasted on the stainless steel operation table, so the heat of the gear ring is not easy to lose after heating.

6. Automatic demagnetization function, the residual magnetism of workpiece after heating is less than 3 Gauss.

7. Suitable for assembly line, long-term continuous operation and stable operation.

8. Built in overheat and overload electrical protection measures.

9. Heating evenly, clean and pollution-free, no fire hazard.

10. The equipment does not need to purchase parts, no vulnerable parts, and easy maintenance.

3、 Operation procedure

1. The heated gear ring is placed at the set position between the operator and the inside of the main engine. The movable yoke is pressed down slightly and in line with the lower yoke end face.

2. Press the start button, the host is powered on, the time relay starts counting, the unit is seconds, and the ring gear is heated.

3. Before pressing the stop button, check the time count, then take out the workpiece, and measure whether the temperature rise at the inner diameter end plane meets the requirements, so as to facilitate the assembly.

4. Continuously heat the ring gear of the same specification, turn the function selection switch to the automatic position and set the heating time. When the workpiece is heated to the set time, the power supply will be automatically turned off and the ring gear can be assembled.

5. After the work is finished, turn the power switch to the stop position to cut off the power supply of the ring gear heater.

齿圈加热器2.jpg

    01

    Energy saving and high efficiency

    20 years of experience, continuous technological innovation

    • 20 years dedicated to improving the quality and performance of induction heating products
    • Has served 4000 + enterprises, accumulated a lot of experience and unique use of energy-saving system
    02

    Heat evenly and expand in equal amount

    Master core technology and purchase famous brand accessories

    • Well known electrical original, easy to replace
    • Ultra thick pure copper coil, each equipment has three groups of flat copper coil
    • The shell is made of 304 thickened stainless steel
    03

    Easy to operate for long life

    Strict management, professional production team to

    • High insulation wire coil frame, ensuring long service life of equipment
    • High standard customization of core materials
    • Professional production team, standardized production and installation, ensure delivery on time
    04

    Quick response of after-sales service

    Let you reduce investment and run without worry

    • Free 1-to-1 customized solution
    • The technical team provides 24-hour service and responds to the demand immediately

    24-hour hotline:+8613813682742

    They all chose Zhuangyuan electrical In the past 20 years, Zhuangyuan electrical has provided high-performance products to more than 4000 enterprises

    Common induction heater questions Common induction heater questions

    Flexible coil heater - coil heating device
    Message consultation We need to remove the bearing inner ring and coupling by heating. How many types of flexib…
    How long does it take for the motor aluminum heater to heat the housing?
    Motor aluminum shell heater (motor shell heater) for motor aluminum shell heating, generally there are two kind…
    What are the heating methods of bearing heater
    Bearing heater is commonly used to heat all kinds of working parts. In our country, the traditional bearing ins…
    What are the features of the motor case heater
    The motor shell heater uses the principle of electromagnetic induction to heat the motor, water pump, fan, clea…
    Will the bearing heater damage the bearing?
    Users usually have some questions when buying our company's "Zhuangyuan brand" bearing induction heat…
    What are the advantages of using induction heater to install bearings?
    Bearing installation directly affects the quality of assembly and product quality, incorrect installation meth…
    Is gear heating machine gear hot set machine
    The "Zhuangyuan" brand series heaters produced by Zhuangyuan electric appliance have a wide range of …
    How to heat the aluminum shell heater of blind hole motor? Blind hole hot set mac…
    The aluminum shell of blind hole motor refers to the through hole with one end for stator, the other end with b…
    What is the difference between bearing heater and bearing heater?
    Bearing remover is a kind of bearing heater. After heating the inner ring of bearing, the inner ring expands eq…
    What are the other uses of multifunctional bearing heater?
    The multifunctional bearing heater can heat the bearing and other ring-shaped metal workpieces. It can heat the…
    How does the flywheel ring gear heater make the ring gear heat and assemble?
    Zhuangyuan brand ring gear heater is specially used for heating ring gear, ring gear and other ring-shaped meta…

    Committed to equipment development and productionConsult immediately for product quotation

    Hotline:+86-0519-86579357

    Hotline

    +86-0519-86579357

    Add wechat